Bgpgeneral; Bgpgracefulrestart - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual
Software for e series broadband services routers system event logging reference guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04:
- Configuration manual (304 pages) ,
- Configuration manual (632 pages)
Table of Contents
Advertisement
JunosE 11.3.x System Event Logging Reference Guide
Filter 6
bgpGeneral
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter 1
Filter 2
Filter 3
Filter 4
Filter 5
Filter 6
bgpGracefulRestart
Description
Emergency
Alert
Critical
38
out—This filter is not currently supported
BGP general information
None
None
None
None
None
BGP IPv4 route-target-signaling address family enabled or disabled; making local route
to multihomed site less preferred (local-preference <> ) because down bit is set
None
Setting local preference to <> for redistributed route of layer2 site
access-class—This filter is not currently supported
peer—See description of the bgpRoutes peer filter for information about this filter
route-map—This filter is not currently supported
router—See description of the bgpRoutes router filter for information about this filter
in—This filter is not currently supported
out—This filter is not currently supported
BGP Graceful Restart Feature log
None
None
None
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 and is the answer not in the manual?