Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 234

JunosE 11.3.x System Event Logging Reference Guide
Error
Warning Log
Notice Log
Info
Debug
Filter
radiusClient
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
radiusCoAAttributes
Description
Emergency
210
None
None
None
None
Supported RADIUS attributes found in the Access-Accept or Access-Reject packet;
reports changes to the Service-Acct-Interval attribute (Juniper VSA 26-140)
None
RADIUS Authentication and Accounting Client
None
None
None
Failure to include the ICR-Partition-Id VSA in Access-Request and accounting messages
when the ICR partition is not found in the AAA list
Failure to send accounting on or accounting off; tunnel password format error; tunnel
accounting request
Dropping tunnel attribute
ICR partition accounting message failures when the Accounting-On response is pending
from the RADIUS server
Authentication or accounting failure due to internal memory allocation failure; memory
allocation failure for profile; failed to insert tunnel attribute and tunnel tag table; found
unexpected tunnel table
None
RADIUS CoA attributes
None
Copyright © 2010, Juniper Networks, Inc.