Chapter 19 T Commands - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual
Software for e series broadband services routers system event logging reference guide
Hide thumbs
Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04:
- Configuration manual (304 pages) ,
- Configuration manual (632 pages)
Table of Contents
Advertisement
CHAPTER 19
T Commands
tacacsPlusServer
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Copyright © 2010, Juniper Networks, Inc.
tacacsPlusServer on page 239
tcpGeneral on page 240
tcpTraffic on page 240
tcpv6Traffic on page 241
telnet on page 242
telnetClient on page 242
tftpClient on page 243
trackerEvents on page 243
trackerGeneral on page 244
tsm on page 244
TACACS+ server
None
None
None
Unable to start TACACS+; failed to create tacacsPlusProcess instance while in startup
Failed to create a host while reading parameters from NVS; primary host not found in
NVS; more than one primary host found in NVS; number of primary hosts in NVS is not
one, and attempts to correct this condition failed; unable to bind socket to source address
configured to TACACS+ server
Received unexpected data from the TACACS+ host, which will result in authentication
failure; either there is no host in NVS, or all attempts to configure a host failed
None
239
Advertisement
Table of Contents
