Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 Reference Manual page 262

Software for e series broadband services routers system event logging reference guide
Hide thumbs Also See for JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04:
Table of Contents

Advertisement

JunosE 11.3.x System Event Logging Reference Guide
Debug
Filter
system
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
238
Detailed debug information related to all communication between the IPSec tunnels
application and the IPSec server and line modules; interactions with the IP Engine
application for virtual router table download to designated IPSec server modules
None
System management and monitoring
None
None
Line module ping failure threshold exceeded; test failure on line module or standby SRP
module; test failure on line module or standby SRP module
Error on line module or standby SRP module; critical subsystem failure condition (NVS,
power, fan, network timing, temperature); unrecognized module type; module ID
mismatch; line module memory reduction; line module bandwidth misconfiguration;
unrecoverable file system synchronization errors; software incompatibility issue
Noncritical subsystem failure condition (heap/CPU utilization, NVS, network timing);
unexpected software error; recoverable file system synchronization errors; file system
out of synchronization notification; NVS subsystem redundancy size mismatch; line
module ID block misconfigured
Subsystem failure condition abatement (heap/CPU utilization, NVS, power, fan, network
timing, temperature); new module announcement; module revision mismatch; module
upgraded or downgraded (ECC/non-ECC); module online or offline
Synchronization start, complete; line module set timing failed (not necessarily an error);
NVS volume flush
Module state change; module memory announcement; redundancy role changes; server
role changes; module enable, disable, or clear notification; file system synchronization
(normal operation); line module timing source set failure (not necessarily an error); image
protection notification
slot slotNumber
slot—Logs events for a specific slot
slotNumber—Number of slot for which you want to log events
Copyright © 2010, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.3

Table of Contents