JunosE 11.3.x System Event Logging Reference Guide
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
Filter
radiusSendAttributes
Description
Emergency
Alert
Critical
Error
Warning Log
Notice Log
Info
Debug
212
None
None
None
Memory-allocation; NVS update failure; subscriber session timeouts
None
None
Receiving invalid radius request. Debugging interaction with AAA/GPLAAN
None
RADIUS attributes added to Access-Accept (inbound RADIUS requests), Acct-Start,
Interim-Acct, and Acct-Stop messages
None
None
None
None
None
None
Parse errors that occur in L2C and DSL Forum attribute strings
Attributes that are added to outbound RADIUS requests, including Access-Request,
Acct-Start, Acct-Stop, interim accounting requests, tunnel accounting requests, and ICR
partition accounting requests; IPv6 accounting VSA attributes (IPv6-Acct-Input-Octets
[26-151], IPv6-Acct-Output-Octets [26-152], IPv6-Acct-Input-Packets [26-153],
IPv6-Acct-Output-Packets [26-154], IPv6-Acct-Input-Gigawords [26-155], and
IPv6-Acct-Output-Gigawords [26-156]) that are added to outbound RADIUS requests,
including Acct-Stop and interim accounting requests; IPv6 RADIUS IETF and VSA
attributes (Ipv6-NdRa-Prefix [26-129], Ipv6-Virtual-Router [26-45], Ipv6-Local-Interface
[26-46], Ipv6-Primary-DNS [26-47], Ipv6-Secondary-DNS [26-48], Framed-IPv6-Route
[99], Framed-IPv6-Pool [100], Delegated-Ipv6-Prefix [123]) that are added to
Access-Accept (inbound RADIUS requests), Acct-Start, Interim-Acct, and Acct-Stop
Copyright © 2010, Juniper Networks, Inc.
Need help?
Do you have a question about the JUNOSE SOFTWARE FOR E SERIES 11.3.X - SYSTEM EVENT LOGGING REFERENCE GUIDE 2010-10-04 and is the answer not in the manual?
Questions and answers