Table of Contents
Advertisement
JunosE 11.3.x Service Availability Configuration Guide
Related
Documentation
Monitoring the Redundancy Status of Line Modules
Purpose
Action
Meaning
62
Table 11: show redundancy history Output Fields (continued)
Field Name
last warm switchover
cold starts
switchovers
SRP activation time
type
slot
system uptime
running release
show redundancy history
Display redundancy information specific to line modules.
To display the redundancy status of the line modules.
host1#show redundancy line-card
automatic reverting is off
hardware
lockout
slot
role
config
----
--------
---------
3
---
---
8
spare
---
12
primary
protected
midplane
midplane
slots
type
rev
------
--------
--------
8 - 13
6
0
Table 12 on page 63 lists the show redundancy line-card command output fields.
Field Description
Date and time the router experienced the last warm
switchover.
Total number of cold starts the router has
experienced.
Number of cold, warm, and consecutive warm
switchovers the router has experienced.
Amount of time the SRP module has been active.
Last type of activation that occurred on this router.
Slot in which the line module resides.
Amount of time the chassis has been operational.
Release running on the SRP module at the time.
backed
up
sparing
by
for
revert
slot
slot
at
------
-------
------
---
---
---
---
---
---
---
---
---
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
