Table of Contents
Advertisement
JunosE 11.3.x Service Availability Configuration Guide
Monitoring the Redundancy Status
Purpose
Action
56
Display the redundancy modes and other information about stateful SRP switchover.
To display summary redundancy status information.
host1#show redundancy
SRP
---
high-availability state:
current redundancy mode:
last activation type:
Criteria Preventing High Availability from being Active
-------------------------------------------------------
criterion
-----------------------------------------------
Standby SRP is online and capable of mirroring?
Line Card
---------
automatic reverting is off
hardware
lockout
slot
role
config
----
--------
---------
3
---
---
8
spare
---
12
primary
protected
midplane
midplane
slots
type
rev
------
--------
--------
8 - 13
6
0
To display detailed redundancy status information:
host1#show redundancy detail
SRP
---
high-availability state:
current redundancy mode:
last activation type:
Criteria Required for High Availability to be Active
----------------------------------------------------
criterion
----------------------------------------------------
Active SRP hardware supports High Availability?
High Availability mode configured?
Mirroring Subsystem present?
Mirroring activity levels within limits?
Network Core Dumps disabled?
Running configuration is safe for High Availability?
Standby SRP hardware supports High Availability?
disabled
high-availability
cold-switch
backed
up
sparing
by
for
revert
slot
slot
------
-------
------
---
---
---
---
---
---
disabled
file-system-synchronization
cold-start
met
---
No
at
---
---
---
met
---
Yes
No
Yes
Yes
Yes
Yes
Yes
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
