Index - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual

Index

A
access modules
ES2 4G LMs as
in an LNS device, stateful switchover............72
access modules in the LNS
receipt of event from an application
access module processes PPP echo
requests.................................................................81
failure with the primary module.......................81
Access-Request messages
ICR Partition ID VSA.....................................................174
Acct-Start messages
ICR Partition ID VSA.....................................................174
Acct-Stop messages
ICR Partition ID VSA.....................................................174
activating guidelines
high availability, line modules
mirroring configuration files from active to
standby.................................................................87
reverting to default redundancy mode.........87
same software release on primary and
secondary modules..........................................87
active
high availability state...................................................40
active, line module high availability state
change in previously matching criterion
transition to disabled state................................87
mirroring of information
relevant applications create and post
transactions.......................................................86
standby module replays updates and
performs changes for applications...........86
updates in settings sent to standby
module.................................................................86
synchronization of data
from active to standby module.......................86
unsupported application configured
transition to disabled state................................87
when a switchover occurs
warm restart of standby module....................87
Copyright © 2010, Juniper Networks, Inc.
application support
high availability...............................................................42
Automatic Reversion
enabling..............................................................................13
automatic switchover.............................................................12
limitations..........................................................................12
Automatic Switchover
disabling.............................................................................13
B
backup router..........................................................................152
defined...............................................................................151
election process and...................................................152
VRRP.................................................................................149
C
call setup rate
data synchronization
impact on..................................................................72
under peak load conditions
time for system to become HA-active..........72
clear redundancy commands
clear redundancy history.............................................65
cold boot
of secondary line module
when slot is disabled...........................................78
when slot is reloaded...........................................78
when software fault occurs...............................78
commands for configuring
stateful SRP switchover
similarity with commands for stateful line
module switchover..........................................69
connection manager
usage of stream ID
to identify connections.......................................80
conventions
notice icons......................................................................xix
text and syntax................................................................xx
customer support...................................................................xxi
contacting JTAC..............................................................xxi
189