Monitoring The Redundancy Status Of Applications - Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual

Related
Documentation

Monitoring the Redundancy Status of Applications

Purpose
Action
Copyright © 2010, Juniper Networks, Inc.
Table 9: show redundancy Output Fields (continued)
Field Name
fabric slice redundancy
slot
slice state
type
show redundancy
Display the redundancy status of the applications.
To display the applications that do not support high availability.
host1#show redundancy clients
Unsupported High Availability Clients
-------------------------------------
client
---------------------
DHCP Proxy Client
Global Ipv6
IPsec Transport (ITM)
l2tpDialoutGenerator
DHCPv6 Local Server
Radius Relay Server
You can also display the redundancy status information of all clients. Specifies whether
the client supports high availability and also the safety level of configuration. For instance,
if an unsupported client is configured on a router with high availability enabled, the
configuration reads "unsafe".
host1#show redundancy clients all
High Availability Client Information
------------------------------------
client
---------------------
atm1483DataService
AA83
aaaServer
atmAal5
AAQS
atm
Bridged Ethernet
Transparent Bridging
dcm
Chapter 3: Managing Stateful SRP Switchover
Field Description
Status of the fabric slice on the SRP modules or SFMs
on the E120 and E320 routers.
Slot in which the fabric slice resides.
State of the fabric slice. Possible values: online or not
present.
Identifier for the type of hardware. Possible values:
SRP modules or SFM modules.
configuration
-------------
safe
safe
safe
safe
safe
safe
mode configuration
----------- -------------
supported safe
supported safe
supported safe
supported safe
supported safe
supported safe
supported safe
supported safe
supported safe
59