Table of Contents
Advertisement
Meaning
Copyright © 2010, Juniper Networks, Inc.
Standby SRP is online and capable of mirroring?
Standby SRP is running the same release?
Line Card
---------
automatic reverting is off
hardware
lockout
slot
role
config
----
--------
---------
3
---
---
8
spare
---
12
primary
protected
midplane
midplane
slots
type
rev
------
--------
--------
8 - 13
6
0
Table 9 on page 57 lists the show redundancy command output fields.
Table 9: show redundancy Output Fields
Field Name
SRP
high-availability state
current redundancy mode
Chapter 3: Managing Stateful SRP Switchover
backed
up
sparing
by
for
revert
slot
slot
at
------
-------
------
---
---
---
---
---
---
---
---
---
Field Description
State of high availability mode:
disabled—Initial, default state for high-availability
mode. The router continues to use file system
synchronization.
active—Data synchronized from the active SRP
module to the standby SRP module during
initialization remains synchronized through
mirroring updates.
pending—If an unsupported application is
configured, the router transitions to this state.
initializing—If SRP module is in initializing state,
bulk synchronization of memory and NVS occurs.
Redundancy mode currently used by the router:
high-availability—Ensures rapid SRP module
recovery after a switchover by using initial bulk file
transfer and subsequent, transaction-based
mirroring.
file-system-synchronization—Default redundancy
mode of the router. SRP modules reload all line
modules and restart form saved configuration files.
Yes
Yes
57
Advertisement
Table of Contents
