Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual page 183

Copyright © 2010, Juniper Networks, Inc.
Table 25: show ip vrrp and show ip vrrp summary Output
Fields (continued)
Field Name
Learning timer mode
last error status
priority
admin priority
auth type
preemption
accept data
assoc address(es)
track object
ip interfaces with vrrp
entries
entries enabled
entries with owner priority
entries in init state
Field Description
Mode of the VRRP router:
enabled—Router learns the VRRP advertisement
interval that is useful in case of failure of the master
router
disabled—Router does not learn the VRRP
advertisement interval.
Help text used to debug any error detected
Priority value of VRRP router
Priority of the VRRP administrative router
Type of authentication used by VRRP: none or text
Status of VRRP router preemption: enabled or
disabled
enabled—Backup router always takes over the
responsibility of the master router.
disabled—Backup router with lower-priority remains
in backup state.
Accept data status of the VRRP router:
enabled—Enables the backup router to process
packets with an IP destination address equivalent
to the virtual addresses while the backup router is
in the master state.
disabled—Disables the processing of data packets
by the backup router while the router is in the
master state.
IP addresses associated with the VRID
Name and state of the tracked object and the value
by which the object priority changes following an
object state change
Number of IP interfaces using VRRP
Total number of entries
Number of enabled entries
Number of entries with an owner priority
Number of entries in an initialization state
Chapter 6: Configuring VRRP
161