Juniper JUNOSE SOFTWARE FOR E SERIES 11.3.X - SERVICE AVAILABILITY CONFIGURATION GUIDE 2010-10-08 Configuration Manual page 208

JunosE 11.3.x Service Availability Configuration Guide
Related
Documentation
186
Table 31: show icr-partitions Output Fields (continued)
Field Name
State
Partition-ID
Dormant ICR Partitions
Backup ICR Partitions
Master ICR Partitions
Total ICR Partitions
Configuring the Interface on Which the ICR Partition Resides on page 176
show icr-partitions
Field Description
State of the ICR partition:
Master—ICR partition that accepts subscriber login
requests.
Backup—ICR partition that does not accept
subscriber login requests.
Dormant—When the IP address or virtual router is
forcibly deleted, or if the lower interface is not
available, the ICR partition moves to the Dormant
state. The dormant ICR partition does not accept
subscriber login requests.
NOTE: The state of the ICR partition depends on the
associated VRRP instance. When the state of the
VRRP instance changes, the state of the ICR partition
also changes. A '*' associated with an ICR partition
indicates that the partition is in transition.
Identifier for the ICR partition.
Number of dormant ICR partitions on the router.
Number of backup ICR partitions configured on the
router.
Number of master ICR partitions configured on the
router.
Total number of ICR partitions configured on the
router.
Copyright © 2010, Juniper Networks, Inc.