Create Snap-Pool - HP 2000fc Cli Reference Manual

create snap-pool

Description
Creates a snap pool volume to use for snapshot data. A snap pool is an internal
volume only and cannot be assigned a LUN.
Input
create snap-pool vdisk vdisk size sizeMB|GB|TB name
Parameter
vdisk vdisk
size sizeMB|GB|TB
name
Example
Create the 10-Gbyte snap pool SP1 on virtual disk VD1.
# create snap-pool vdisk VD1 size 10GB SP1
Success: Snap-pool Created.
Related Commands
"delete snap-pool" on page 78
■
"show snap-pools" on page 216
■
"show vdisks" on page 230
■
58 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Description
Specifies the virtual disk by name or serial number. For the
syntax to use, see "Virtual Disk Syntax" on page 26.
Specifies the volume size in MB (Mbyte), GB (Gbyte), or
TB (Tbyte). The size uses base 10 (multiples of 1000) or
base 2 (multiples of 1024); to see the current base setting,
type show cli-parameters. For information about
estimating snap-pool size, see help for the WBI's Create
Snap-Pool page.
Specifies a name for the new snap pool volume. For the
syntax to use, see "Volume Syntax" on page 26.