Expand Volume - HP 2000fc Cli Reference Manual

expand volume

Description
Expands a standard volume or snap-pool volume by a specified size. Expansion is
restricted to the available space on the virtual disk that hosts the volume. If
insufficient space is available for expansion on the virtual disk, first expand the
virtual disk by using
Note –
1. Delete all of its snapshots by using
2. Convert it to a standard volume by using
3. Expand the standard volume by using
4. Convert the expanded volume to a master volume by using
master
Input
To expand a volume by a specific size:
expand volume volume size sizeMB|GB|TB
To expand a volume to the maximum size:
expand volume volume size
Parameter
volume
size sizeMB|GB|TB
size max
92 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
expand vdisk
To expand a master volume:
.
Description
Specifies the volume to expand. For the syntax to use,
"Volume Syntax" on page 26.
Specifies the amount of space to add to the volume in MB
(Mbyte), GB (Gbyte), or TB (Tbyte). The size uses base 10
(multiples of 1000) or base 2 (multiples of 1024); to see
the current base setting, type show cli-parameters.
Expands the volume to fill the available space on the
virtual disk.
.
delete all-snapshots
convert master-to-std
expand volume
max
.
.
.
convert std-to-