Show Events - HP 2000fc Cli Reference Manual

show events

Description
Shows events for an enclosure, including events from each Management Controller
and each Storage Controller. A separate set of event numbers is maintained for each
controller module. Each event number is prefixed with a letter identifying the
controller module that logged the event.
Events are listed from newest to oldest, based on a timestamp with one-second
granularity; therefore the event log sequence matches the actual event sequence
within about one second.
If SNMP is configured, events can be sent to SNMP traps.
Input
To show a certain number of events:
show events [last #] [a|b|both|error]
To show events by date:
show events [from date] [to date] [a|b|both|error]
To show events by ID:
show events [from-event ID] [to-event ID] [a|b|both|error]
Parameter
last #
from date
Description
Optional. Shows the latest specified number of events. If
this parameter is omitted, all events are shown.
Optional. Shows events including and after the specified
date and time. Use the format MMDDYYhhmmss, where
hh is the hour on a 24-hour clock. For example,
043006235900 represents Apr 30 2006 at 11:59:00
p.m.
Chapter 3 Command Descriptions 181