Show Ntp-Status - HP 2000fc Cli Reference Manual

show ntp-status

Description
Shows the status of the use of Network Time Protocol (NTP) in the system.
Input
show ntp-status
Output
The output first indicates whether use of NTP is enabled (
the client task becomes present. Before activation and after successful deactivation
the status of the client task is not applicable (
NTP server, if any, is displayed. If the system has received a time message from an
NTP server, the time of that contact is displayed.
Field
Status
Client Task Status
NTP Server Address
Last Server Contact
204 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
). The configured IP address of an
n/a
Description
• activated: NTP is enabled
• deactivated: NTP is disabled
• n/a: NTP is disabled
• present: NTP is enabled and the client task is
active
• missing: NTP is enabled but the client task is in an
interim state
NTP server IP address, if set
Date and time, in UT, of the last message received
from the NTP server, if any
). If activated,
activated