Show Snapshots - HP 2000fc Cli Reference Manual

show snapshots

Description
Shows information about snapshots for a specified controller, master volume, or
snap pool. If no parameters are specified, information about all snapshots is shown.
Input
show snapshots [controller a|b|both] | [master-volume volume] |
[snap-pool volume]
Parameter
controller a|b|both
master-volume volume
snap-pool volume
Output
Field
Vdisk
Serial#
Name
Creation Date/Time
Status
218 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Description
Optional. Only includes snapshots owned by controller
A only, controller B only, or by either controller
(both).
Optional. Only includes snapshots associated with the
specified master volume name or serial number. For
the syntax to use, see "Volume Syntax" on page 26.
Optional. Only includes snapshots associated with the
specified snap pool name or serial number. For the
syntax to use, see "Volume Syntax" on page 26.
Description
Virtual disk name
Snapshot serial number
Snapshot name
Date and time the snapshot was prepared or committed
Indicates whether the snapshot is Available or
Unavailable