Set Global-Spare - HP 2000fc Cli Reference Manual

set global-spare

Description
Designates spare disk drives that can be used by any virtual disk. Sets the disk drive
status to
drives that are large enough to protect existing virtual disks. You can designate a
maximum of eight global spares for the system.
Input
set global-spare disks disks
Parameter
disks disks
Example
Designate the disk drive having ID 5 in the controller enclosure as a global spare.
# set global-spare disks 0.5
Info: Disk 0.5 configured as a Global Spare.
Success: Command completed successfully
Related Commands
"delete global-spare" on page 73
■
"show disks" on page 174
■
. For the command to succeed, you must specify disk
global-spare
Description
Specifies the disk drives. For the syntax to use, see "Disk Drive
Syntax" on page 25.
Chapter 3 Command Descriptions 129