show cli-parameters
Description
Shows the current CLI settings.
Input
show cli-parameters
Output
Field
Timeout
Output Format
Base
Pager
Disk
Addressing
Mode
164
HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Description
Timeout value, in seconds, for the login session.
• console: Output is shown in human-readable console
format.
• api: Output is shown in XML format.
• 2: Capacities are shown in base 2, which uses 1024 as a
divisor.
• 10: Capacities are shown in base 10, which uses 1000 as a
divisor.
• enabled: Pager feature is enabled, which halts output after
each full screen until keyboard input is detected.
• disable: Pager feature is disabled.
Controls the format in which drive IDs are shown and must be
specified:
• enclosure-slot: Drives are shown, and must be
specified, with the format enclosure-ID.drive-slot-
number. For example, the first drive in the second enclosure
(enclosure ID 1) has address 1.0.
• channel-id: Drives are shown, and must be specified, by
SCSI ID. For example, the first drive in the second enclosure
has address 16.