Viewing Command Help; Size Of Devices And Logical Units - HP 2000fc Cli Reference Manual

Viewing Command Help

To view brief descriptions of all commands that are available to the user level you
logged in as, type:
# help
To view help for a specific command, type either:
# help
command
#
To view information about the syntax to use for specifying disk drives, virtual disks,
volumes, and volume mapping, type:
# help syntax

Size of Devices and Logical Units

The size of disk drives and logical units such as virtual disks and volumes are
presented in base 2 (binary) format, not base 10 (decimal) format. Table 1-1 shows
how sizes are presented in each format.
Table 1-1 Sizes in Binary and Decimal
Unit
Kbyte
Mbyte
Gbyte
Tbyte
To check which format is being used, use "show cli-parameters" on page 164. To
change the output format, use "set cli-parameters" on page 118.
command
?
Size in Binary
1024 bytes
1024 Kbyte
1,048,576 bytes
1024 Mbyte
1,073,741,824 bytes
1024 Gbyte
1,099,511,627,776 bytes
Size in Decimal
1000 bytes
1000 Kbyte
1 million bytes
1000 Mbyte
1 billion bytes
1000 Gbyte
1 trillion bytes
Chapter 1 Using the CLI 29