Show Volume-Maps - HP 2000fc Cli Reference Manual

show volume-maps

Description
Shows mapping information for a specified volume or for all volumes.
Input
show volume-maps [volume]
Parameter
volume
Output
Field
SN
Name
CH
ID
LUN
Access
Host-Port-
Identifier
Nickname
Description
Optional. Specifies the volume by its name or serial number. For the
syntax to use, see "Volume Syntax" on page 26. If this parameter is
omitted, information for all volumes is shown.
Description
Volume serial number.
Volume name.
Host ports that the volume is mapped on.
FC and iSCSI only. An index into a table of port IDs (not the actual
port ID). This is always 0.
Logical unit number.
Access mode: read-write (rw) or read-only (ro).
• FC or SAS: The host's world wide port name (WWPN)
• iSCSI: The iSCSI host initiator's node name (typically the IQN)
• all other hosts for the volume's default mapping
Host nickname, or blank if not set or for all other hosts.
Chapter 3 Command Descriptions 235