Clear Expander-Status - HP 2000fc Cli Reference Manual

clear expander-status

Description
Note –
advice of a service technician.
Clears the counters and status for SAS expander lanes. Counters and status can be
reset to a good state for all enclosures, or for a specific enclosure whose status is
Error
Input
clear expander-status [enclosure id]
Parameter
enclosure id
Example
Clear the expander status for the controller enclosure.
# clear expander-status enclosure 0
Success: Cleared Expander Status
Related Commands
"show expander-status" on page 184
■
"set expander-fault-isolation" on page 125
■
"set expander-phy" on page 127
■
This command should be used only by service technicians, or with the
as shown by the
show expander-status
Description
Optional. Specifies the enclosure number, as shown by the
show expander-status command.
command.
Chapter 3 Command Descriptions 47