show volumecopy-status
Description
Shows information about in-progress volume copy operations. While a volume copy
is in progress, the destination volume cannot be accessed.
Input
show volumecopy-status [controller a|b]
Parameter
controller a|b
Output
Field
VC Volume Name
Serial#
Vdisk
Source Volume
Progress
Status
Status-Reason
Description
Optional. Shows volume copy operations for volumes owned
by controller A or controller B only. If this parameter is
omitted, all volume copy operations are shown.
Description
Destination volume name
Destination volume serial number
Destination virtual disk name
Source volume name
Percent complete of the volume copy
Indicates whether the destination volume is Unavailable or
Suspended
The status is Unavailable while the volume-copy is in
progress. The status is Suspended if the source volume goes
offline while the copy is in progress. When the source volume
comes back online, the copy process resumes from the point
where it stopped.
Chapter 3 Command Descriptions
233