Example
Set the controller date to 1:45 PM on September 22, 2007 in the U.S. Mountain time
zone (GMT -07:00).
# set controller-date sep 22 13:45:0 2007 -7
Success: Command completed successfully
Enable NTP using a specified time-zone offset and NTP server address.
# set controller-date sep 22 13:45:0 2007 -7 ntp enabled ntpaddress
69.10.36.3
Success: Command completed successfully
Related Commands
"show controller-date" on page 168
■
Chapter 3 Command Descriptions
121