set host-port-interconnects
Description
FC direct-attach mode only. Enables or disables the internal connection between
controller host port pairs. In a dual-controller system, each host port on controller A
is connected to a peer host port on controller B. When the connection between peer
host ports is enabled, it forms an FC-AL loop. This command affects the
connections between all host port pairs.
In order to enable the connections, the
must be set to
Input
set host-port-interconnects enable|disable
Example
Enable the connections between all host port pairs.
# set host-port-interconnects enable
Success: Command completed successfully
Related Commands
"show host-parameters" on page 190
■
"show host-port-interconnects" on page 193
■
132
HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
for all ports.
loop
fibre-connection-mode
host parameter