Operation Modes - HP 2000fc Cli Reference Manual

Operation Modes

By default the CLI is an interactive application. When you are logged into the CLI,
the CLI waits for a command to be entered and then responds to it. This single-
operation mode is known as interactive mode.
The following example shows interactively starting a
the CLI, executing a command to show free (available) disks, and exiting the CLI:
$: telnet 172.22.5.55
Login: monitor
Password: ********
product
System Name: Test
System Location: Lab
Version: version
# show disks free
ID Serial#
--------------------------------------------------------------------------
3 3KN0Z0BZ00007626NM4F
6 VDK41BT4CVLPNE
7 3KN0Z6PD00007626NLV5
10 3KN0Z09500007626NM28
--------------------------------------------------------------------------
# exit
CLI commands can also be scripted using a
library. Scripts can use interactive mode to execute single commands to emulate a
single-command mode.
16 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Vendor Rev. State
SEAGATE 0003 AVAIL
ATA A9BA AVAIL
SEAGATE 0003 AVAIL
SEAGATE 0003 AVAIL
session, logging into
telnet
Type Size(GB) Rate(Gb/s) SP
SAS 146 3.0
SATA 250 3.0
SAS 146 1.5
SAS 146 3.0
client like Expect or a Perl
telnet