Show Host-Parameters - HP 2000fc Cli Reference Manual

show host-parameters

Description
Shows information about host ports on both controllers.
Input
show host-parameters
Output
Field
Ctlr
Ch
Type
Media
Topo (C)
Speed (A)
Speed (C)
Status
190 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Description
Controller ID
Host port number
• Host: Host port
• FC(P): Fibre Channel Point-to-Point
• FC(L): Fibre Channel-Arbitrated Loop
• SAS: Serial Attached SCSI
• iSCSI: Internet SCSI
FC or SAS only. Configured topology
FC or SAS only. Actual link speed:. Blank if not applicable.
FC or SAS only. Configured link speed:
• FC: 2G or 4G (Gbit/sec)
• SAS: 3G (Gbit/sec)
• Blank if not applicable
Whether the port is operational (Up) or not (Down)