Create Iscsi-Host - HP 2000fc Cli Reference Manual

create iscsi-host

Description
iSCSI only. Associates a nickname with an iSCSI host initiator's node name. You
can then use the nickname when mapping volumes to hosts.
Input
create iscsi-host name name nickname
Parameter
name name
nickname
Example
Create the nickname myHost for the iSCSI host initiator with the node name
iqn.1991-05.com.microsoft:myHost.domain
# create iscsi-host name iqn.1991-05.com.microsoft:myHost.domain
myHost
Success: adding iSCSI host done
Related Commands
"delete iscsi-host" on page 75
■
"set iscsi-host" on page 134
■
"show iscsi-hosts" on page 195
■
Description
Specifies an iSCSI host initiator's node name. This is typically the
initiator's IQN (iSCSI Qualified Name). This must not be an existing
node name, as displayed with the show iscsi-hosts command; it
must be one that you get from some other source of information. To
add or change a nickname for an existing node name, use set
iscsi-host.
Specifies a nickname for the iSCSI host initiator. For the syntax to use,
see "Host Nickname Syntax" on page 27.
.
Chapter 3 Command Descriptions 53