Scrub Vdisk - HP 2000fc Cli Reference Manual

scrub vdisk

Description
For specified RAID 3, 5, 6, and 50 virtual disks, this command verifies all parity
blocks. For specified RAID 1 and 10 virtual disks, this command compares the
primary and secondary drives. In addition, this command scrubs virtual disk
metadata, and stripe and NRAID virtual disks.
When the scrub is complete, an event is logged specifying the number of errors
found.
Input
scrub vdisk vdisks
Parameter
vdisks
Example
Scrub the disk drives in virtual disk
# scrub vdisk VD1
Info: Scrub started on Vdisk VD1
Success: Command completed successfully
Related Commands
"abort scrub" on page 39
■
"show vdisks" on page 230
■
106 HP StorageWorks 2000 Family Modular Smart Array CLI reference guide • May 2008
Description
Specifies the virtual disks by name or serial number. For the syntax to
use, see "Virtual Disk Syntax" on page 26.
.
VD1