Cisco AS5350XM Configuration Manual page 90

Configuring Clocking
Command or Action
Step 5
AS5400(config-voice-dsp)# end
Step 6
AS5400(config-voice-dsp)# Ctrl-Z
AS5400#
Verifying
To verify your firmware upgrade, use the show voice dsp version command.
AS5400#show voice dsp version ?
IOS-Bundled Default
==========================
system:/bundled_fw_image
On-Flash Dspware-Filename
=========================
flash:dsp_c5510_flex.rbf
flash:new_flex.rbf
flash:big.rbf
DSP#
3/1
3/2
3/3
3/4
3/5
3/6
3/7
3/8
3/9
3/10
3/11
Configuring Clocking
The time-division multiplexing (TDM) bus on the Cisco AS5350XM and Cisco AS5400XM universal
gateway backplane can receive an input clock from one of these basic sources on the gateway:
•
•
•
BITS is a single building master timing supply. BITS generally supplies DS1 and DS0 level timing
Note
throughout an office. In North America, BITS is the clock that provides and distributes timing to a
wireline network's lower levels.
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
30
Type Version
C5510 4.5.9051
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
C5510 4.4.5
T1, E1, and CT3 feature cards
An external T1 or E1 clock source feed directly through the Building Integrated Timing Supply
(BITS) interface port on the motherboard
Free-running clock providing clock from an oscillator
Basic Configuration Using the Command-Line Interface
Purpose
Exits config-voicedsp mode and returns to global
configuration mode.
Returns to enable mode.
Version Firmware-Type
======= =============
4.4.5 c5510
Version Firmware-Type
======= =============
4.5.9051 c5510
4.4.5 c5510
4.5.985x c5510
Filename
flash:dsp_c5510_flex.rbf
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image
system:/bundled_fw_image