Cisco AS5350XM Configuration Manual page 134

Universal gateways software configuration guide
Hide thumbs Also See for AS5350XM:
Table of Contents

Advertisement

Where to Go Next
AS5400(config)#
Press the Enter key to verify your command registers, and then type Ctrl-Z to return to privileged EXEC
Step 7
mode.
AS5400(config)# Ctrl-Z
AS5400#
Save your changes when ready.
Step 8
AS5400# copy running-config startup-config
This process does not delete any existing SPE firmware that resides in system flash memory in case you
later want to revert to it. If you decide to delete the code from system flash memory, remember that all
files in system flash memory are deleted; therefore, save and restore any important files (for example,
the Cisco IOS software image).
If the new Cisco IOS image contains the same SPE firmware as the old one, no new code is downloaded
Note
to the SPEs.
Where to Go Next
At this point you can go to these references:
The following publications are useful for those familiar with the Cisco universal gateway products that
Tip
use MICA modems.
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence,
Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are
service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP,
CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo,
Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive,
HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace,
MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare,
SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo
are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
20
Chapter 7, "Configuring Voice over IP"
network.
Appendix C, "Comprehensive Configuration Examples."
Comparing Universal Port SPE Commands to MICA Modem
http://www.cisco.com/warp/customer/76/nextport_compare.html.
Managing Port Services on the Cisco AS5350 Universal
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_serv/as5350/sw_conf/alxnxpt.htm.
Managing Port Services on the Cisco AS5400 Universal
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/nextport/i
ndex.htm.
For more advanced configuration topics, see the Cisco IOS software configuration guide, feature
modules, and command reference publications Dial Solutions Configuration Guide and Dial
Solutions Command Reference Guide for your software release.
Managing and Troubleshooting the Universal Port and Dial-Only Feature Cards
to learn how to configure voice and fax traffic over an IP
Commands, available online at
Gateway, available online at
Gateway, available online at

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

As5400xm

Table of Contents