Cisco AS5350XM Configuration Manual page 46

Analyzing the System Boot Dialog
Analyzing the System Boot Dialog
The Cisco AS5350XM and Cisco AS5400XM universal gateways have a specific boot sequence. To
view the boot sequence through a terminal session, you must have a console connection to the gateway
before it powers up.
If you observe no messages on the console port, verify that the baud rate is configured correctly. The
Note
Cisco AS5350XM and Cisco AS5400XM console port can support a baud rate up to 115200.
The following boot sequence occurs. Step numbers and comments are inserted in the example to describe
the boot sequence.
In the following segment, the gateway decompresses the system boot image, tests the NVRAM for
Step 1
validity, and decompresses the Cisco IOS image.
System Bootstrap, Version 12.3(12r)PI6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
AS5400XM platform with 524288 Kbytes of main memory
Self decompressing the image :
##########################################################################################
##########################################################################################
################################ [OK]
Cisco IOS release, available memory, hardware interfaces, and modem lines are displayed.
Step 2
Note
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
Cisco IOS Software, 5400 Software (C5400-JS-M), Version 12.3(14)T,
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 29-Jan-05 02:10 by yiyan
Image text-base: 0x60011068, data-base: 0x61F80000
Cisco AS5400XM (BCM) processor (revision 0x21) with 393215K/131072K bytes of memory.
Processor board ID JAB082904P4
SB-1 CPU at 750MHz, Implementation 1025, Rev 0.3, 256KB L2 Cache
Last reset from IOS reload
Manufacture Cookie Info:
EEPROM Version 0x4, Board ID 0x4BD,
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
2
If a feature card type is not recognized, verify that you are running the optimum version of
Cisco IOS software. Refer to the hardware-software compatibility matrix, available online at
http://cco-sj-1.cisco.com/cgi-bin/front.x/Support/HWSWmatrix/hwswmatrix.cgi
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Verifying Basic Setup
RELEASE SOFTWARE (fc1)