Cisco AS5350XM Configuration Manual page 191

Figure 7
An AS54-DFC-8CT1
Do not press any keys on the keyboard until the messages stop. Any keys pressed during this time are
Caution
interpreted as the first command typed when the messages stop, which might cause you to power cycle
the gateway and start over. It takes a few minutes for the messages to stop.
The messages look similar to the following display.
The displayed messages depend on the Cisco IOS software release and feature set you selected. The
Note
screen displays in this section are for reference only and might not exactly reflect the messages on your
console.
System Bootstrap, Version 12.3(12r)PI6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
AS5400XM platform with 524288 Kbytes of main memory
Self decompressing the image :
##########################################################################################
##########################################################################################
################################ [OK]
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, 5400 Software (C5400-JS-M), Version 12.3(14)T,
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sat 29-Jan-05 02:10 by yiyan
Image text-base: 0x60011068, data-base: 0x61F80000
Power Switch Location
An AS54-DFC-108NP
Restricted Rights Legend
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
Power switch
Getting Started
RELEASE SOFTWARE (fc1)
7