Cisco AS5350XM Configuration Manual page 204

ROM Monitor Commands
prompted to change or keep the information held in each bit of the virtual configuration register. In
either case, the new virtual configuration register value is written into NVRAM and does not take
effect until you reset or power cycle the gateway.
The configuration register resides in NVRAM. The configuration register is identical in operation
to other Cisco gateways. Enter the confreg command for the menu-driven system, or enter the new
value of the register in hexadecimal.
Note
For example:
rommon 2 > confreg
Configuration Summary
(Virtual Configuration Register:0x0)
enabled are:
break/abort has effect
console baud:9600
boot:the ROM Monitor
do you wish to change the configuration? y/n
enable
enable
enable
enable
disable "break/abort has effect"? y/n
enable
change console baud rate? y/n
enter rate:0 = 9600,
4 = 19200, 5 = 38400, 6 = 57600, 7 = 115200
change the boot characteristics? y/n
(Virtual Configuration Register:0x0)
enabled are:
break/abort has effect
console baud:9600
boot:the ROM Monitor
do you wish to change the configuration? y/n
cont [-b]—Continues a loaded image that has stopped. The -b option sets the requested break points
•
before continuing.
For example:
reboot >
monitor: command "launch" aborted due to user interrupt
diagmon 7 > cont
reboot>
context—Displays the CPU context at the time of the fault. The context from kernel mode and
•
process mode of a booted image is displayed, if available.
For example:
rommon 6 > context
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
4
The value is always interpreted as hex. The confreg utility prints a before and after view of
the configuration register when used in menu-driven mode.
"diagnostic mode"? y/n
"use net in IP bcast address"? y/n
"load rom after netboot fails"? y/n
"use all zero broadcast"? y/n
"ignore system config info"? y/n
1 = 4800,
Configuration Summary
[n]: y
[n]:
[n]:
[n]:
[n]:
[n]:
[n]:
[n]: y
2 = 1200, 3 = 2400
[0]:
[n]:
[n]:
ROM Monitor