Cisco AS5350XM Configuration Manual page 56

Using the Interface Queue Wedge Monitor
AS5400#
Show interfaces. (In this case, some interfaces are already wedged.)
Step 2
AS5400# show wedged-interfaces output
Interface Name
Async4/00
Async4/01
Async4/02
Async4/03
GigabitEthernet0/0
GigabitEthernet0/1
Virtual-Access2
Virtual-Access3
AS5400#
Show the interface wedge process running.
Step 3
AS5400# show proc cpu | i Intf
39
AS5400#
Disable the interface monitor.
Step 4
AS5400# configure terminal
Enter configuration commands, one per line.
AS5400#(config)# no interface-monitor enable
AS5400#(config)# ^Z
AS5400#
AS5400#
Show the interface wedge process running again. (No process is running now.)
Step 5
AS5400# show proc cpu | i Intf
AS5400#
Show the wedged interface output. (No output.)
Step 6
AS5400# show wedged-interfaces output
Interface Name
AS5400#
AS5400#
Enable the Interface Queue Wedge Monitor again.
Step 7
AS5400# configure terminal
Enter configuration commands, one per line.
AS5400#(config)# interface-monitor enable
AS5400#(config)# ^Z
AS5400#
00:39:03: %HHM-3-INTFWEDGE: Async4/00 Output Queue Wedged
00:39:04: %SYS-5-CONFIG_I: Configured from console by console
00:39:06: %HHM-3-INTFWEDGE: Async4/01 Output Queue Wedged
00:39:09: %HHM-3-INTFWEDGE: Async4/02 Output Queue Wedged
00:39:12: %HHM-3-INTFWEDGE: Async4/03 Output Queue Wedged
00:39:15: %HHM-3-INTFWEDGE: GigabitEthernet0/0 Output Queue Wedged
00:39:18: %HHM-3-INTFWEDGE: GigabitEthernet0/1 Output Queue Wedged
00:39:39: %HHM-3-INTFWEDGE: Virtual-Access2 Output Queue Wedged
00:39:42: %HHM-3-INTFWEDGE: Virtual-Access3 Output Queue Wedged
AS5400#
AS5400#
AS5400#
Show wedge output.
Step 8
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
12
Time Since Wedge
00:23:33
00:23:26
00:23:21
00:23:15
00:24:35
00:24:50
00:38:19
00:38:19
0 341 0
Time Since Wedge
0.00% 0.00% 0.00% 0 Intf Wedge Monit
End with CNTL/Z.
End with CNTL/Z.
Verifying Basic Setup