Tone Defeat Mode; Channel Level - Denon AVR-4806CI Operating Instructions Manual

Basic Operation
CH SEL/ENTER
CURSOR
5 CURSOR
Press the
"Bass" or "Treble".
6 CURSOR
Press the
level.
To increase the bass or treble:
The bass or treble sound can be increased to up to +6
dB in steps of 1 dB.
To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB
in steps of 1 dB.
7
ENTER
Press the button.
• The surround parameter menu screen re-appears.
8
ENTER
Press the or
button to complete the setting.
¢ Tone defeat mode
• If you do not want the bass and treble to be adjusted, turn
on the tone defeat mode.
TONE DEFEAT
Press the
"Tone Defeat" mode.
The signals do not pass through the bass and treble
adjustment circuits, providing higher quality sound.
SURROUND
PARAMETER
TONE DEFEAT
D D or H H button to select
F F or G G button to set the
SURROUND PARAMETER
button to turn on the
TU
BAND
CH SEL/ ENTER
SURROUND
PARAMETER

Channel Level

• You can adjust the channel level either according to the
playback sources or to suit your tastes, as described below.
1
CH SEL/ENTER
Press the
• Display the "Channel Vol." screen.
Channels which is not used are not displayed.
2
CURSOR
Press the
button to select the speaker.
The channel switches as shown below each time the
CH SEL/ENTER button is pressed.
FL
FADER
3
CURSOR
Press the
level.
The adjustment range for the different channels is +12
dB to –12 dB in step of 0.5 dB.
The sound from the subwoofer can be completely cut
by lowering the SW (subwoofer) setting one additional
from –12 dB (setting it to "OFF").
• When the surround back speaker setting is set to "1spkr"
for "Speaker Configuration" (
to "SB".
64
TUNING
MODE
CURSOR
button.
D D , H H or CH SEL/ENTER
C FR SW SR
SL SBL SBR
F F or G G button to adjust the
page 125, 126), this is set