Pty Search; Tp Search - Denon AVR-4806CI Operating Instructions Manual

PTY search

• Use this function to find RDS stations broadcasting a
designated program type (PTY).
• For a description of each program type, refer to "Program
Type (PTY)".
1 Set the input source to "TUNER".
(Main unit)
2
TU
Press the
button to select the TUNER
mode.
3
RDS SEARCH
Press the
SEARCH" appears on the display.
The main unit's display switches as follows each time
the RDS SEARCH button is pressed.
Display
FM RDS SEARCH
RT ON
4
Watching the display, press the
G G button to call out the desired program type.
5
CHANNEL
Press the
• Automatically begin the PTY search operation.
If there is no station broadcasting the designated
program type with above operation, all the reception
bands are searched.
The station name is displayed on the display after
searching stops.
(Remote control unit
in the AMP mode)
(TUNER)
(Remote control unit)
button until "PTY
PTY SEARCH

TP SEARCH

CURSOR
F F or
button.
6
To continue searching, repeat step 3.
If no other station broadcasting the designated
program type is found when all the frequencies are
searched, "NO PROGRAMME" is displayed.
TP search
• Use this function to find RDS SEARCH stations broadcasting
traffic program (TP stations).
1
Set the input source to "TUNER".
(Main unit)
2
TU
Press the
button to select the TUNER
mode.
3 RDS SEARCH
Press the
SEARCH" appears on the display.
The main unit's display switches as follows each time
the RDS SEARCH button is pressed.
Display
FM RDS SEARCH
RT ON
69
Basic Operation
(Remote control unit
in the AMP mode)
(TUNER)
(Remote control unit)
button until "TP
PTY SEARCH
TP SEARCH