Network Setup; Setting The Ip Address - Denon AVR-4806CI Operating Instructions Manual

Network Setup

• If you are using a broadband router (DHCP function), there is no need to make the settings at "Setting the IP Address" and
"Setting the Proxy", since the DHCP function is set to "ON" in the AVR-4806CI's default settings.
• If the AVR-4806CI is being used connected to a network without the DHCP function, the network settings must be made. In
this case, some knowledge of networks is required.

Setting the IP Address

• Set this when "OFF" is set for "DHCP".
1
CURSOR
Press the
"Network Setup" at the "System Setup
Menu", then press the
• The "Network Setup" screen appears.
2
CURSOR
Press the
Address", then press the
• The "IP Address" screen appears.
3 CURSOR F F
Press the
"OFF".
• The DHCP function is disabled.
4 CURSOR
Press the
desired setting item, then press the
CURSOR
button and
the address.
IP Address:
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if
other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
D D or H H button to select
ENTER
button.
D D or H H button to select "IP
ENTER
button.
G G
or button to select
D D or H H button to select the
CURSOR G G
D D or H H button to input
Subnet Mask:
When connecting an xDSL modem or terminal
adapter directly to the AVR-4806CI, input the subnet
mask indicated in the documentation supplied by
your provider. Normally input 255.255.255.0.
Gateway:
When connected to a gateway (router), input its IP
address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the
documentation supplied by your provider, input it at
"Primary DNS". If there are two or more DNS
addresses, input the first one at "Second DNS".
5
ENTER
Press the
• The "IP Address" menu reappears.
• DHCP (Dynamic Host Configuration Protocol):
These are systems by which the IP address and other
network settings are automatically set for the AVR-4806CI,
computer, broadband router and network devices.
• DNS (Domain Name System):
This is a system for converting the domain names used
when browsing
"www.denon.jp") into the IP addresses actually used for
communications (for example, "202.221.192.106").
123
Advanced Setup – Part 1
button to enter the setting.
Internet sites (for example,