Presetting (Registering) Internet Radio Stations - Denon AVR-4806CI Operating Instructions Manual

Basic Operation
ENTER
CURSOR
• There are many Internet radio stations on the Internet. The
programs they broadcast and their bit rates vary widely.
Generally, the higher the bit rate, the higher the sound
quality, but streamed music or sound may be broken if the
communication lines or servers are busy. Inversely,
programs with low bit rates have lower sound quality but
tend to be more stable.
• "Server Full" or "Connection Down" is displayed if the
station is congested or if it is not broadcasting.
• If you do not want the OSD to be displayed while playing
Network Audio (internet radio, music server), set
"Function/Mode Status" at "Setting the On Screen Display"
to "OFF" ( page 110).
Presetting (registering) Internet radio
stations
• There are two ways to register stations: by presetting them
or by storing them in your favorites.
• Stations that are preset can be tuned in directly from the
remote control unit.
1
MEMORY
Press the
Internet radio station you want to register.
• The registration menu screen appears.
2
CURSOR D D
Press the
"Preset", then press the
button.
• The preset registration screen appears.
button while playing the
H H
button to select
or
CURSOR G G
ENTER
or
MEMORY BLOCK
ENTER
NUMBER
3
MEMORY BLOCK
Press a
NUMBER
press a
station at the desired preset channel.
• This completes registration.
If no button is operated for approximately ten
seconds, the regular display reappears.
Registered presettings can be checked on the on
screen display.
The presettings can only be displayed with the on
screen display when the "NetAudio" function is
selected.
NOTE:
• Registered presettings are deleted when they are
overwritten.
¢ Listening to preset Internet radio stations
When the "NetAudio" function is selected, press a
MEMORY BLOCK
NUMBER 1 8
( ~ ) button.
• The connection is made automatically and playback starts.
76
TUNING
MEMORY
CURSOR
A G
( ~ ) button, then
1 8
( ~ ) button to register the
A G
( ~ ) button, then press a