Zone2 And Zone3 Tone Control And Channel Level Setting - Denon AVR-4806CI Operating Instructions Manual

Advanced Setup – Part 1
ZONE2 and ZONE3 tone control and
channel level setting
• Adjust the sound output from ZONE2 and ZONE3.
1
CURSOR
Press the
"Zone2/3 Tone/Ch Lev." at the "Option Setup"
menu, then press the
• Display the "Zone2/3 Tone/Ch Lev." screen.
2 CURSOR
Press the
zone whose sound you want to adjust (ZONE2,
ZONE3), then press the
• Switch to the setting screen.
Example: When "Zone2" is selected
D D or H H button to select
ENTER
button.
D D or H H button to select the
ENTER
button.
3
CURSOR
Press the
item to be set, then press the
button to adjust the parameter.
Bass:
Adjust the tone for the bass.
Treble:
Adjust the tone for the treble. (The bass or treble
sound can be adjusted between –12 dB and +12
dB in steps of 2.0 dB.)
HPF:
Set this to "ON" if your speakers do not have a
very strong capacity for producing low bass. Using
the high pass filter makes it possible to reduce
distortion of the bass sound.
Channel Level:
Set so that the playback level is the same for the
left and right channels. (The volume can adjusted
between –12 dB and +12 dB in steps of 1.0 dB.)
4
ENTER
Press the
• Return to the "Zone2/3 Tone/Ch Lev." screen.
Use the same procedure to make the settings for
ZONE3.
5
CURSOR
Press the
"Exit", then press the
• The "Option Setup" menu reappears.
• The "Channel Level" setting is only possible when ZONE2
or ZONE3 is set to "Stereo" in the "Channel Setup" menu.
120
D D or H H button to select the
CURSOR
F F or G G
button.
D D or H H button to select
ENTER
button.