Rds Search - Denon AVR-4806CI Operating Instructions Manual

Basic Operation
CURSOR FG

RDS search

• Use this function to automatically tune to FM stations that
provide RDS service.
1
Set the input source to "TUNER".
(Main unit)
2
TU
Press the
button to select the TUNER
mode.
3 RDS SEARCH
Press the
SEARCH" appears on the display.
The main unit's display switches as follows each time
the RDS SEARCH button is pressed.
Display
FM RDS SEARCH
RT ON
(Remote control unit
in the AMP mode)
(TUNER)
(Remote control unit)
button until "RDS
PTY SEARCH
TP SEARCH
TU
CURSORFG
RDS SEARCH
CHANNEL
4
CHANNEL
Press the
• Automatically begin the RDS search operation.
If no RDS stations is found with above operation, all
the reception band are searched.
When a broadcast station is found, that station's name
appears on the display.
5
To continue searching, repeat step 3.
If no other RDS station is found when all the
frequencies are searched, "NO RDS" is displayed.
68
button.