Denon AVR-4806CI Operating Instructions Manual page 139

3. Audio Input Setup
Audio Input Setup
Digital In This assigns the digital input terminals for the
1
Assign different input sources.
2 EXT.IN Setup Set the Ext.In terminal playback method.
Input The playback level is corrected individually for the different
3
Function Lev. input sources.
Function The names of the different input source can be changed as
4
Rename desired and displayed on the display.
IEEE1394 The connected IEEE1394 device can be automatically
5
Assign identified to assign the input source.
IEEE1394 Set the function for associating playback of the connected
6
Auto Func. IEEE1394 device on or off.
Auto
FM stations are received automatically and
Preset
stored in the memory.
Memory
Tuner
7
Presets
Preset Preset channels that are not used often can be
Skip skipped.
Preset The preset channels can be given the names
Name you want.
4. Video Setup
Video Setup
The HDMI or DVI input terminals are assigned for the
HDMI/DVI In
1 different input sources.
Assign
Select the HDMI audio signal playback method.
Component This assigns the component video input terminals for the
2
In Assign different input sources.
Video Convert This sets whether or not to use the video conversion
3
Mode function.
This sets whether or not to use the function for converting
analog video (composite video, S-Video or component
HDMI Out video) signals into HDMI signals.
4
Assign When using this conversion function, set the aspect ratio,
set the resolution, set the color format and video range of
the signals output from the HDMI terminal.
Set the audio delay timing to synchronize the sound and
5 Audio Delay
video.
This sets whether or not to display the on-screen display
On Screen
6 that appears on the monitor screen when the controls on
Display
the remote control unit or main unit are operated.
5. Advanced Playback
Advanced Playback
2ch The speaker settings can be changed specifically for
1
Direct/Stereo playing in the 2-channel direct or stereo mode.
Dolby Digital Turn the audio compression on or off when down-mixing
2
Setup Dolby Digital signals.
Auto
3 Surround Set the Auto surround mode function.
Mode
Manual EQ This parameter is for optimizing the Room EQ with which
4
Setup the audio signals are produced from the speakers.
Input
CD DVD VDP TV
source
Digital
COAX 1 COAX 2 COAX 3 OPT 1
Inputs
Surr.Sp = Surr.A, SW Level = +15dB
CDR /
TUNER PHONO CD DVD VDP TV
TAPE
0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB
CDR /
TUNER PHONO CD DVD VDP TV
TAPE
A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz
B1 ~ B8 520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz
C1 ~ C8 90.1 MHz
D1 ~ D8 90.1 MHz
E1 ~ E8 90.1 MHz
F1 ~ F8 90.1 MHz
G1 ~ G8 90.1 MHz
DVD VDP TV
NONE NONE NONE
DVD VDP TV
1-RCA 2-RCA 3-RCA
Function/Mode = ON, Master Volume = ON, Mode = Mode 1
Auto Surround Mode = ON
All Channels and Frequency = 0 dB
139
Advanced Setup – Part 2
Default settings
CDR /
DBS VCR-1 VCR-2 VCR-3
TAPE
OFF OPT 2 OPT 3 OFF OPT 4
DBS VCR-1 VCR-2 VCR-3
0 dB 0 dB 0 dB 0 dB
DBS VCR-1 VCR-2 VCR-3 V.AUX
–
Auto Function = OFF
All preset channels = OFF
–
Default settings
DBS VCR-1 VCR-2 VCR-3
NONE NONE NONE NONE
DBS VCR-1 VCR-2 VCR-3
NONE NONE NONE NONE
ON
Convert = ON
Aspect = Full
Resolution = 480p/576p
Color Space = Y Cb Cr
RGB Mode = Normal
0 ms
Default settings
Basic
OFF
Page
V.AUX
99, 100
OPT 5
100
V.AUX AUX
101
0 dB 0 dB
Net
101, 102
Audio
102
103
103
104
104, 105
Page
V.AUX
106, 107
NONE
V.AUX
107
NONE
107
108, 109
109
110
Page
111
112
112
113, 114