Special Mode; Special Mode Configuration Buttons - Denon RCD-N9 Service Manual

SPECIAL MODE

Special Mode Configuration Buttons

b No. 1 ： In "STANDBY" status, press and hold the "A" and "B" buttons along with the power operation button for at least three
seconds.
b No. 2 - 6 ： In "STANDBY" status, press and hold the "A" and "B" buttons along with the power operation button to turn on the
power.
b No. 7 ： While holding down the "A" and "B" buttons, insert the AC plug, turn on the power and wait at least three seconds.
If the "ON/STANDBY" button is lit, the unit enters this mode.
No. Mode
1 Version Display Mode
2 Factory Initialization Mode
3 User Initialization Mode
4 CD Test mode
5 Protection History Display Mode
6 USB UPDATE
7 Forced USB All Device Write Mode
GTop panelH
GFront panelH
ButtonnA
CURSOR u
CURSOR u
VOLUME d
CURSOR o
CURSOR o
CURSOR p
CURSOR u
X
ButtonnB
The firmware version is indicated in the display.
-
(See 24 page)
Restores settings to the default settings.
INPUT
b Can erase the Recently Played list.
SOURCE
(See 23 page)
This is similar to factory initialization, except that the version
VOLUME f upgrade information and protection history are not cleared.
(See 24 page)
Servo adjustment, Leaser current, ON time
VOLUME d
(See 26 page)
INPUT Displays the protection occurrence history.
SOURCE (See 29 page)
INPUT Switches this unit to USB Update mode.
SOURCE (See 31 page)
Mode used when this unit cannot be recovered.
1 / 3 /ENTER
Forcibly switches this unit to USB update mode. (See
VOLUME df CURSOR uiop
INPUT SOURCE
VOLUME
22
Contents
1 / 3 /ENTER
ENTER
open/close
33 page)