Video Setup; Setting The Hdmi/Dvi In Assignment - Denon AVR-4806CI Operating Instructions Manual

Advanced Setup – Part 1

Video Setup

• Make the video-related settings.
Setting the HDMI / DVI In Assignment
• This setting assigns the HDMI input terminals and DVI input
terminal for different input sources.
• Set the method for playing the audio signals included in the
HDMI input signal.
1
CURSOR
Press the
"Video Setup" at the "System Setup Menu",
ENTER
then press the
• Display the "Video Setup" menu screen.
2
CURSOR
Press the
"HDMI / DVI In Assign", then press the
button.
• Display the "HDMI / DVI In Assign" screen.
3
CURSOR
Press the
input source, then press the
button to select the input terminal.
Select from among HDMI1 to 3 and DVI-D.
If the same HDMI or DVI input terminal is selected, the
setting for the input source that was previously
assigned switches to "NONE".
D D or H H button to select
button.
D D or H H button to select
ENTER
D D or H H button to select the
CURSOR F F or G G
4
CURSOR
Press the
method for playing the audio signals included
in the HDMI input signal, then press the
CURSOR
F F or G G button to select "AMP" or
"TV".
AMP:
Play the audio signals on speakers connected to
the AVR-4806CI.
TV:
Play the audio signals on a TV connected to the
AVR-4806CI.
5
CURSOR
Press the
input for the playback of signals when the
audio signal of HDMI can not be reproduced,
then press the
the input signal (EXT. IN or ANALOG).
If there is no HDMI audio signal, the signal
automatically switches to the input from the set
terminal.
1~3 correspond to each HDMI 1~3 input terminal.
6
ENTER
Press the
• The "Video Setup" menu reappears.
106
D D or H H button to select the
D D or H H button to select the
CURSOR F F or G G button to select
button to enter the setting.