Dts Neo:6 Mode - Denon AVR-4806CI Operating Instructions Manual

Basic Operation
STANDARD ENTER
PHONES CURSOR

DTS NEO:6 mode

• Surround playback can be performed for the analog input and
digital input 2-channel signals.
1
STANDARD
Press the
NEO:6" mode.
• The DTS NEO:6 indicator lights.
The mode switches as shown
below each time the STANDARD
button is pressed.
DOLBY PL II x
2
Play a program source.
3
SURROUND PARAMETER
Press the
• Display the "Surround Parameter" menu.
4
CURSOR
Press the
play mode.
SURROUND
PARAMETER
button to select "DTS
lights
DTS NEO:6
button.
F F or G G button to select the
ENTER
SURROUND
PARAMETER
5
CURSOR
Press the
various surround parameters.
6
CURSOR
Press the
parameters setting.
7
ENTER
Press the
button to complete the setting.
• When "Default Yes" is selected and the CURSOR F F button is
pressed, "MODE" and "TONE" are automatically reset to
the default values and "CINEMA EQ." is set to "OFF".
• When playing PCM digital signals or analog signals in the
DOLBY PRO LOGIC II
modes and the input signal switches to a digital signal
encoded in Dolby Digital, the Dolby Surround mode switches
automatically. When the input signal switches to a DTS
signal, the mode automatically switches to DTS surround.
58
STANDARD
CURSOR
D D or H H button to select the
F F or G G button to adjust the
SURROUND PARAMETER
or
, DOLBY PRO LOGIC II x, DTS NEO:6