Listening To Internet Radio - Denon AVR-4806CI Operating Instructions Manual

FUNCTION ENTER
CURSOR
¢ Network settings
When using a broadband router (DHCP function), the
network settings are made automatically, so there is no
need to make the settings from the setup menu.
If the broadband router's DHCP function is turned off, make
the "Network Setup" (

Listening to Internet radio

• The required system connections and settings must be
made in order to listen to Internet radio.
"Update?" appears on the display when connecting to an
Internet radio station for the first time.
1
FUNCTION
Either turn the
AUX
button to select "NetAudio" (AMP mode).
• The "Network Audio" menu screen appears.
(Main unit)
2
CURSOR D D
Press the
"Internet Radio", then press the
CURSOR G G
button.
• The initial screen when not connected to the Internet
is displayed.
3
Connecting to an Internet radio station for the
first time:
ENTER
Press the or
• The update screen appears.
page 123, 124).
knob or press the
(Remote control unit in the AMP mode)
H H
button to select
or
ENTER
CURSOR G G
button.
ENTER
4
ENTER
Press the
again.
• The latest list of radio stations is downloaded from
the vTuner site. (Several minutes are required for this
download.)
5
CURSOR D D
Press the
desired setting item, then press the
CURSOR G G
Finally, the list of Internet radio stations is displayed
and those that can be played are indicated by the "
mark in front of them.
6
CURSOR D D
Press the
desired radio station, then press the
CURSOR G G
• Connection starts, and the station starts playing
once the buffer reaches "100%".
During playback, press the ENTER button once to
or pause playback, then press ENTER button again to
resume playback.
If the ENTER button is pressed and held in for more
than two seconds when in the play or pause mode,
playback stops and the previous menu window
reappears.
75
Basic Operation
CURSOR
AUX
CURSOR G G
or button once
H H
button to select the
or
button.
H H
button to select the
or
button.
ENTER
or
∗
"
ENTER
or