Denon AVR-4806CI Operating Instructions Manual page 57

5
CURSOR
Press the
various surround parameters.
II
Example: DOLBY PL
When set with the on screen display using the remote
control unit while in the MUSIC mode, set the "
mark to "OPTIONS 0" pressing the CURSOR D D or H H
button, then press the CURSOR F F button.
Press the ENTER button to return to the previous
screen.
6
CURSOR
Press the
parameters setting.
DEFAULT setting:
CURSOR
Press the
Yes 0 ", then parameters set to default setting.
7
ENTER
Press the or
button to complete the setting.
D D or H H button to select the
x Music mode screen
F F or G G button to adjust the
F F button to select "Default
SURROUND PARAMETER
¢ Surround parameters r
Pro Logic II x and Pro Logic
Select one of the modes ("Cinema", "Music", "Pro Logic"
or "Game").
The Cinema mode is for use with stereo television shows
and all programs encoded in Dolby Surround.
The Music mode is recommended for stereo music and
surround-encoded stereo music sources.
The Pro Logic mode emulates Dolby Laboratories' original
Dolby Pro Logic surround decoding, and may provide better
results with older, legacy surround-encoded program
material.
The Game mode is optimized for computer and/or
dedicated game box consoles, that feature stereo analog or
digital outputs. It can only be used with 2-channel stereo
"
sources.
PANORAMA:
This mode extends the front stereo image to include the
surround speakers for an exciting "wraparound" effect
with side wall imaging.
Select "OFF" or "ON".
DIMENSION:
This control gradually adjust the soundfield either towards
the front or towards the rear.
The control can be set in 7 steps from 0 to 6.
CENTER WIDTH:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers
as a phantom image; or from all three front speakers to
varying degrees.
The control can be set in 8 steps from 0 to 7.
57
Basic Operation
II Mode: