Connecting The Trigger Out Terminals; Connecting The Multi Zone Terminals; Zone2 (Or Zone3) Pre-Out Connections - Denon AVR-4806CI Operating Instructions Manual

Connecting Other Sources

Connecting the TRIGGER OUT terminals

Connecting the MULTI ZONE terminals

For instructions on operations using the MULTI ZONE functions (

ZONE2 (or ZONE3) pre-out connections

• If another power amplifier or pre-main (integrated) amplifier is connected, the ZONE2 (or ZONE3) pre-out (variable/fixed level)
terminals can be used to play a different program source in ZONE2 (or ZONE3) the same time (
• The ZONE2 (or ZONE3) video out is only for the ZONE2 (or ZONE3).
• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the
MAIN ZONE and ZONE2 (ZONE3), the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 (ZONE3)
using the remote control unit.
Extension terminals for future use.
NOTE:
• For the AUDIO output, use high quality pin-plug cables and wire in such a way that there is no humming or noise.
• For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions.
Turn the DC 12V voltage on and off for the
individual functions and surround modes.
For details, see "Setting the Trigger Out" (
page 119).
page 90 ~ 93).
H
I
A
L
R
AUX OUT
RC-616
INFRARED
RETRANSMITTER
40
page 92, 93).
TV (Monitor)
(ZONE2 or ZONE3)
VIDEO
IN
S VIDEO
IN
Power amplifier
(ZONE2 or ZONE3)
L
L
IN
R
R
INPUT OUTPUT
+ +
RC-617
INFRARED
SENSOR