Dsp Surround Simulation - Denon AVR-4806CI Operating Instructions Manual

Basic Operation
7CH STEREO ENTER
DSP SIMULATION

DSP surround simulation

1
Select the surround mode for each input
channel.
Example: DSP surround simulation mode
(Main unit)
Example: 7CH STEREO mode
(Main unit)
The surround mode switches in the following order
each time the DSP SIMULATION button is pressed:
WIDE SCREEN SUPER STADIUM
MATRIX
VIDEO GAME MONO MOVIE
2
SURROUND PARAMETER
Press the
• Display the surround parameter menu.
The screen for the selected surround mode appears.
SURROUND
PARAMETER
CURSOR
(Remote control unit)
(Remote control unit)
ROCK ARENA
JAZZ CLUB
CLASSIC CONCERT
button.
ENTER
SURROUND
PARAMETER
3
CURSOR
Press the
various surround parameters.
4
CURSOR
Press the
parameters setting.
5
ENTER
Press the
button to complete the setting.
• The "7CH STEREO" display changes as shown below
according to the surround back speaker setting.
SURROUND BACK SPEAKER
ON
OFF
• When "Default Yes" is selected and the CURSOR F F button is
pressed, "CINEMA EQ." and "D.COMP." are automatically
turned off, "ROOM SIZE" is set to "medium", "EFFECT
LEVEL" to "10", "DELAY TIME" to "30 ms" and "LFE" to
"0 dB".
• The "ROOM SIZE" expresses the expansion effect for the
different surround modes in terms of the size of the sound
field, not the actual size of the listening room.
62
DSP SIMULATION
7CH STEREO
CURSOR
D D or H H button to select the
F F or G G button to adjust the
SURROUND PARAMETER
or
DISPLAY
7CH STEREO
5CH STEREO