Denon AVR-4806CI Operating Instructions Manual page 140

Advanced Setup – Part 2
6. Option Setup
Option Setup
Channel The number of channels that you wish to play back in each
1
Setup zone are assigned to each zone accordingly.
To suit your preference, a power amp other than the front
can be assigned to a playback channel, and the front
Power Amp
2 channel bi-amp playback, or the ZONE2 or ZONE3
Assign
playback channel can be output from the AVR-4806CI
speakers.
This sets the volume level of each zone output.
Volume Limit:
This sets the upper limit for the master
volume.
Power On Level:
This sets the volume level upon switching on
Volume
3 the power of each zone.
Control
Mute Level:
This sets the amount of attenuation of the
audio output when each zone is muted.
Volume Level:
This sets whether the output level of ZONE2
to 3 is fixed or variable.
This sets the Trigger Out output for the
Trigger Out different input sources.
4
Setup If "ZONE = MAIN" is selected, settings can be
made for the individual surround modes.
Zone2/3 Adjust the tone and channel level of the sound
5
Tone/Ch Lev. output from ZONE2 and ZONE3.
Digital Out This sets the OPTICAL2 output for digital audio recording
6
Assign "ZONE3/REC SELECT", or "ZONE2 SELECT".
User This stores the current user settings in the
Memory memory.
Setup
7
Memory/Lock
Setup This sets whether or not to lock the system
Lock setup settings so that they cannot be changed.
7. Network Setup
Network Setup
1 IP Address The IP address-related settings are made here.
2 Proxy The proxy-related settings can be changed here.
Power Set whether or not to accept control from the
saving network in the standby mode.
Network
3
Option
PC
Select the language of the computer's OS.
Language
Main Zone
Surr.B = Used, S.Back = 2sp
Front Center
Front Center
Main Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
Zone2 Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
Zone3 Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL
ZONE = MAIN, All Surround Modes = ON
Trigger CDR /
TUNER PHONO CD DVD
TAPE
Out 1
OFF OFF OFF OFF ON
Trigger CDR /
TUNER PHONO CD
Out 2 TAPE
ON ON ON ON
CDR /
Trigger
TUNER PHONO CD
Out 3 TAPE
ON ON ON ON
Zone2 Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
Zone3 Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB
140
Default settings
Zone2 Zone3
Stereo Stereo
Surr. A Surr. B
Surr. A Surr. B
VDP TV DBS VCR-1 VCR-2 VCR-3 V.AUX
ON ON ON ON ON ON
ZONE = 2
DVD VDP TV DBS VCR-1 VCR-2
ON ON ON ON ON ON
ZONE = 3
DVD VDP TV DBS VCR-1 VCR-2
ON ON ON ON ON ON
ZONE3/REC SELECT
–
Setup Lock = OFF
Default settings
ON
OFF
ON
eng
Page
115
S. Back
116, 117
S. Back
118
AUX
ON ON
VCR-3 V.AUX 119
ON ON
VCR-3 V.AUX
ON ON
120
121
121
122
Page
123
124
124